|
SAFETY ELEMENT |
GENERAL PLAN 2007 - 2027 |
|
|
|
|
|
A safety
element for the protection of the community from any unreasonable risks
associated with the effects of seismically induced surface rupture, ground
shaking, ground failure, tsunami, seiche, and dam failure; |
|
|
A
safety element for the protection of the community from any unreasonable
risks associated with slope instability leading to mudslides and landslides; |
|
|
A
safety element for the protection of the community from any unreasonable
risks associated with subsidence, liquefaction and other seismic hazards
identified pursuant to Chapter 7.8 (commencing with Section 2690) of the
Public Resources Code, and other geologic hazards known to the legislative
body; |
|
|
A
safety element for the protection of the community from any unreasonable risks
associated with flooding; |
|
|
A
safety element for the protection of the community from any unreasonable
risks associated with and wild land and urban fires. |
|
|
The
safety element shall include mapping of known seismic and other geologic hazards. |
|
|
It
shall also address evacuation routes, peakload water supply requirements, and
minimum road widths and clearances around structures, as those items relate
to identified fire and geologic hazards. |
|
|
Prior
to the periodic review of its general plan and prior to preparing or revising
its safety element, each city and county shall consult the Division of Mines
and Geology of the Department of Conservation and the Office of Emergency
Services for the purpose of including information known by and available to
the department and the office required by this subdivision. To the extent
that a county’s safety element is sufficiently detailed and contains
appropriate policies and programs for adoption by a city, a city may adopt
that portion of the county’s safety element that pertains to the
city’s planning area in satisfaction of the requirement imposed by this
subdivision. At least 45 days prior to adoption or amendment of the safety
element, each county and city shall submit to the Division of Mines and
Geology of the Department of Conservation one copy of a draft of the safety
element or amendment and any technical studies used for developing the safety
element. The division may review drafts submitted to it to determine whether
they incorporate known seismic and other geologic hazard information, and
report its findings to the planning agency within 30 days of receipt of the
draft of the safety element or amendment pursuant to this subdivision. The
legislative body shall consider the division’s findings prior to final
adoption of the safety element or amendment unless the division’s
findings are not available within the above prescribed time limits or unless
the division has indicated to the city or county that the division will not
review the safety element. If the division’s findings are not available
within those prescribed time limits, the legislative body may take the
division’s findings into consideration at the time it considers future
amendments to the safety element. Each county and city shall provide the
division with a copy of its adopted safety element or amendments. The
division may review adopted safety elements or amendments and report its
findings. All findings made by the division shall be advisory to the planning
agency and legislative body. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|